DC Grass Cutter (Sudarshan)

Before operating this product, read and observe all warnings, cautions, and instructions on the product and in this Owner’s Manual.

GENERAL SAFETY PROCEDURES

Warning: When using the unit, all safety rules must be followed. Please read these instructions before operating the unit in order to ensure the safety of the operator and any bystanders. Please keep these instructions for later use. Warning: This unit can cause serious injury including amputation or blindness to the operator and others. The warnings and safety instructions in this manual must be followed to provide reasonable safety and efficiency in using the unit. The operator is responsible for following the warnings and instructions in this manual and on the unit. Read the entire instruction manual before assembling and using the unit! Restrict the use of this unit to persons who read, understand, and follow the warnings and instructions in this manual and on the unit. Never allow children to operate this unit.

OPERATOR SAFETY

• Dress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance on your unit (safety glasses are available). Eye protection should be marked Z87.
• Always wear hearing protection.
• Always wear a face or dust mask if the operation is dusty.
• Always wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended.
• Always wear foot protection. Do not go barefoot or wear sandals.
• Secure hair above shoulder length. Secure or remove loose clothing and jewelry or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.
• Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning lines/blades.
• Stay alert. Do not operate units when you are tired, ill, upset or under the influence of alcohol, drugs, or medication. Watch what you are doing; use common sense.
• Keep handles free of oil and fuel.
• Always use the handlebar (see ASSEMBLY).

CAUTION:

Misuse of this motor can damage it or shorten its life. Only use the machine for its intended purposes.

CUTTING SAFETY WARNING:

1. Inspect area before starting unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation.
2. Keep others including children, animals, bystanders, and helpers at least 0 feet away. Bystanders should be encouraged to wear safety glasses. Stop the machine immediately if you are approached.
3. Hold the unit firmly with both hands.
4. Keep firm footing and balance. Do not overreach.
5. Keep the blade or trimmer head below waist level. Do not raise the blade above your waist.
6. Keep all parts of your body away from the blade, trimmer head, and muffler when the machine iis running. A hot muffler can cause serious burns.
7. Cut from your left to your right. Cutting on the right side of the shield will throw debris away from the operator.
8. Use only in daylight or good artificial light.
9. Use only for jobs explained in this manual.
10. Always press the emergency stop button when the machine is not in use.
11. DO not rest the machine on its blade.
12. Never remove the battery in running condition.
13. Never leave the machine in working mode.
14. Keep the machine out of kid’s range.
15. Keep oiling the parts of the machine on a regular basis.
16. Keep checking the air in the wheels once a week.

TRANSPORTING AND STORAGE

1. Stop the unit before carrying.
2. Keep the clothes away from your machine.
3. Allow the machine to cool and secure the unit before storing or transporting it in a vehicle.
4. Disconnect the battery to avoid any kind of spark or short circuiting.
5. Store unit so the blade cannot accidentally cause injury.
6. Store unit out of reach of children.

GRASS CUTTER SAFETY

Blade can thrust violently away from material it does not cut. Blade thrust can cause amputation of arms or legs. Do not use a trimmer head as a fastening device for the blade. The blade continues to spin after the trigger is released or the machine is turned off. The coasting blade can throw objects or seriously cut you if accidentally touched.

WARNING:

1. Inspect area before starting unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation.
2. Throw away and replace blades that are bent, warped, cracked, broken or damaged in any other way.
3. Stop using the machine when the battery has been discharged.
4. Install required shield properly before using the unit.
5. Use only specified blades and make sure it is properly installed and securely fastened.
6. Always use the handlebar (see ASSEMBLY).

WARNING:

Description	Petrol Cutter	Exosolar DC Brush Cutter	Other DC Cutters
Fuel	Petrol + Oil	Battery Based	Battery Based
Operation Timing	4-5 Hours	5-6 Hours	35 Mins
Ease Of Use	Needed to be Carried on Shoulder	Wheel Supported no Load on Operator	Needed to be Carried on Shoulder
Ease Of start	Pulley Starter	MCB Operation	Port Operation
Vendor Support	Good	Good	Good
Made In India	NA	Yes	NA
Enviromental Friendly	No	Yes	No
Operation Cost	Approx Rs400/Day	Approx Rs.0.40/Day	Approx Rs0.25/Day
Patents	NA	Yes with the Company	NA

BATTERY AND BATTERY CHARGER

The machine has been powered by a 27V 7.8Ah Lithium ion battery. The battery charger has been included along with the machine. When the battery is fully charged, all the LED lights on the machine will be on whereas when the battery level drops below 20%, only 1 LED i.e. the last LED light will be on.

The Battery level indicator on the machine will show the level upto which the battery is charged.

The battery is supposed to be charged for a maximum 6-7 hours. Charging the battery more than that can damage the battery or the charger.

TROUBLESHOOTING

Description	Petrol Cutter	Exosolar DC Brush Cutter
Machine fails to start	Emergency ON/OFF switch is off.	Engage ON/OFF switch.
	Battery Discharged	Charge The battery
Excessive vibration/noise	Blade loose or unbalanced.	Tighten and balance blade.
Ease Of start	Bent/damaged blade	See an authorized service dealer

One(1) YEARS LIMITED WARRANTY

Exosolar is committed to building equipment that will provide years of dependable service. Our warranties are consistent with our commitment and dedication to quality.

ONE(1) YEAR LIMITED WARRANTY OF EXOSOLAR PRODUCTS FOR INDUSTRIAL USE.

Exsosolar(“Seller") warranties to the original purchaser only, that all Exosolar consumer power tools will be free from defects in material or workmanship for a period of one(1) year from date of purchase.

SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this One(1) Year Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or improperly repaired, by person(s) other than an Authorized Seller or Service Center.

Please be aware that normal wear parts are not covered this warranty. This includes blades and wheels. Battery issues, and/or other damage found to be the result of careless handling, over charging, wiring damage on battery charger is not covered under this limited warranty. To make a claim under this Limited Warranty, you must return the entire power tool product; transportation prepaid, to Exosolar. The owner must include a legible copy of the original receipt, which shall list the date of purchase, along with the company’s name where the product was purchased.

THIS LIMITED WARRANTY DOES NOT APPLY TO ANY ACCESSORY ITEMS INCLUDED WITH THE TOOL SUCH AS CIRCULAR SAW BLADES OTHER RELATED ITEMS OR TO ANY REPLACEMENT PARTS LISTED UNDER MAINTENANCE. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE(1) YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT.

PLEASE SAVE ALL OF YOUR ORIGINAL RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.

QUESTIONS? PROBLEMS?

Please contact us at our email id info@exosolar.in for any questions and/or comments. We are available Mon-Fri 9am-5pm IST to help solve any issues that you might encounter.